archive-lt.com » LT » I » INSPALVUS.LT

Total: 106

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • ps77
    Value 2 0mA Kleber Melting Range 90 114 C Kofler Gel Time 180 C 80 120 sec Gel Time 200 C 50 80 sec Tg DSC 55 5 0 5 C Tests Colours Tested RAL 3005 RAL 5010 RAL 9010 Adhesion EN ISO 2409 1994 0 0 0 Buchholdz EN ISO 2815 80 80 80 Cupping test EN ISO 1520 No cracking at a diameter of 5mm No cracking at a diameter of 5mm No cracking at a diameter of 5mm Bend test EN ISO 1519 1995 No cracking at a diameter of 5mm No cracking at a diameter of 5mm No cracking at a diameter of 5mm Impact test ASTM D 2794 1993 No cracking at 2 5Nm No cracking at 2 5Nm No cracking at 2 5Nm Kesternich EN ISO 3231 1997 No penetration or detachment beyond 1mm No penetration or detachment beyond 1mm No penetration or detachment beyond 1mm Acetic acid salt spray resistance ISO 9227 1990 1000 hrs Conforming to QUALICOAT specification Conforming to QUALICOAT specification Conforming to QUALICOAT specification Accelerated weathering test EN ISO 11341 1997 Residual Value not less than 10 Residual Value not less than 10 Residual Value not less than 10 Resistance to mortar ASTM D 3260 1996 No defects no detachment No defects no detachment No defects no detachment Resistance to boiling water No defects no detachment No defects no detachment No defects no detachment Humidity Test DIN 50017 1982 No defects no detachment No defects no detachment No defects no detachment Product Guide Colour A limited range of colour Surface Matt CM Specific gravity 1 5 1 7 gr cm3 low with dark colours high with light colours Shelf Life 12 months 30 C and 50 RH Gloss Level 15 30 gloss 60 Application Data Application Method Can be applied

    Original URL path: http://inspalvus.lt/products/ps77/ (2016-04-30)
    Open archived version from archive


  • ph80
    attractive benefits Features Benefits Min 30 years warranty Hyperdurable powder Fluoropolymer chemistry No solvents or emissions One coat finishes Label free Good flow out Guaranteed performance on correctly pre treated aluminium Perfect colour and gloss retention Excellent chemical and solvent resistance Less waste and pollution to the environment Economical single layer system Reduced risk to health Smooth film appearance Uses PH80 series has been developed for use on extruded architectural aluminium including window and door frames and extruded panel work on commercial buildings Performance Guide UV Weather PH80 has perfect UV resistance Flow out Very good Melting Range 90 114 C Kofler Weather Resistance Gloss Retention according to ASTM G 53 Remaining Gloss vs Hours Series Description Qualicoat Class AAMA Class Florida Exposure years PE58 Standart polyester Class 1 AAMA 2603 1 PSD70 Super Durable polyester Class 2 3 PH80 Hyper Durable polyester Class 3 AAMA 2605 10 Product Guide Colour A limited range of solid and metallic colours Due to the extreme durability requirements organic pigments cannot be used Evaluations by our laboratory on a case to case basis are necessary Please note that All RAL colours and other custom colours can be formulated with PH80 series However due to the limited long term durability of the organic pigments durability of the final products may decrease 10 20 Surface Gloss GL Semigloss HR Semimatt CS Specific gravity 1 3 1 7 gr cm3 low with dark colours high with light colours Shelf Life 12 months 30 C and 50 RH Gloss Level 30 80 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Suitability of metallic effects for Tribo processing must be verified prior to application Cure Schedule Metal

    Original URL path: http://inspalvus.lt/products/ph80/ (2016-04-30)
    Open archived version from archive

  • pe50
    Good UV resistance No solvents or emissions TGIC free Diversity Serviceable finish Suitable for most exterior environments Less waste and pollution to the environment Reduced risk to health Uses PE50 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas window and door systems dish antenna garden tools and industrial applications etc Performance Guide UV Weather PE50 has very good UV resistance Flow out Very good Buchholz Hardness 85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt 0 Direct Impact 25 kgcm Reverse Impact 25 kgcm Tribo Value 2 0mA Kleber Melting Range 90 114 o C Kofler Gel Time 180 C 200 300 sec Tg DSC 58 0 0 5 C Product Guide Colour A wide range of colour Surface Semigloss HR Semimat CS Mat CM Wrinkle WR Structure ST Specific gravity 1 5 1 8 gr cm³ low with dark colours high with light colours Shelf Life 12 months 30 C and 50 RH Gloss Level 15 80 gloss 60 colour dependent for HR CS and CM Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 180 16 200 10 recommended 210 8 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m² kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated Metals Zinc phosphate or chromate Precautions and

    Original URL path: http://inspalvus.lt/products/pe50/ (2016-04-30)
    Open archived version from archive

  • pe10
    colour One coat finishes No solvents or emissions Good yellowing resistance Dead matt Diversity Serviceable finish Less waste and pollution to the environment Less yellowing at high temperature and by the time Decorative film appearance Uses PE10 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas architectural applications garden tools and industrial applications etc Performance Guide UV Weather PE10 has very good UV resistance Flow out Very good Buchholz Hardness 85 Conical Mandrel Cross Hatch Adhesion Gt 0 Direct Impact 10 kgcm Reverse Impact 5 kgcm Tribo Value 2 0mA Kleber Melting Range 90 114 C Kofler Gel Time 180 C 200 300 sec Tg DSC 64 0 0 5 C Product Guide Colour A wide range of colour Surface Matt CM Specific gravity 1 5 1 7 gr cm3 low with dark colours high with light colours Shelf Life 12 months 30 C and 50 RH Gloss Level 2 15 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature oC Time minutes 190 15 200 10 recommended 210 8 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity and surface profile Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated Metals Zinc phosphate or chromate Precautions and Limitations As a result of possible wide application variations and stoving conditions PE10 may show variation

    Original URL path: http://inspalvus.lt/products/pe10/ (2016-04-30)
    Open archived version from archive

  • pe22
    Features Benefits Available for all RAL colour One coat finishes Very Good UV resistance No solvents or emissions Good yellowing resistance Diversity Serviceable finish Suitable for most exterior environments Less waste and pollution to the environment Less yellowing at high temperature and by the time Uses PE22 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas window and door systems dish antenna garden tools and architectural applications etc Performance Guide UV Weather PE22 has very good UV resistance Flow out Very good Buchholz Hardness 90 Conical Mandrel 0 mm Cross Hatch Adhesion Gt 0 Direct Impact 25 kgcm Reverse Impact 20 kgcm Tribo Value 2 0mA Kleber Melting Range 85 95 C Kofler Gel Time 180 C 180 260 sec Tg DSC 57 0 0 5 C Product Guide Colour A wide range of colour Surface Matt CM Wrinkle WR Specific gravity 1 5 1 8 gr cm³ low with dark colours high with light colours Shelf Life 12 months 30 C and 50 RH Gloss Level 20 40 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 190 15 200 10 recommended 210 8 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m² kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated Metals Zinc phosphate or

    Original URL path: http://inspalvus.lt/products/pe22/ (2016-04-30)
    Open archived version from archive

  • pe26
    for all RAL colour One coat finishes Very good UV resistance No solvents or emissions Good yellowing resistance Fast cure Diversity Serviceable finish Suitable for most exterior environments Less waste and pollution to the environment Less yellowing at high temperature and by the time Save energy time and money Uses PE26 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas dish antenna garden tools and electric panels etc Performance Guide UV Weather PE26 has very good UV resistance Flow out Medium Buchholz Hardness 90 Conical Mandrel 0 mm Cross Hatch Adhesion Gt 0 Direct Impact 40 kgcm Reverse Impact 20 kgcm Tribo Value 2 0mA Kleber Melting Range 90 114 C Kofler Gel Time 180 C 100 150 sec Tg DSC 55 0 0 5 C Product Guide Colour A wide range of colour Surface Gloss GL Semigloss HR Wrinkle WR Structure ST Specific gravity 1 5 1 8 gr cm³ low with dark colours high with light colours Shelf Life 12 months 30 C and 50 RH Gloss Level 60 95 gloss 60 colour dependent for GL and HR Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 160 15 170 10 recommended 200 6 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m² kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate

    Original URL path: http://inspalvus.lt/products/pe26/ (2016-04-30)
    Open archived version from archive

  • bonded
    higher metallic pigment amounts max 10 Less agglomeration on the guns ejectors and nozzles Minimum picture framing effect Shorter delivery time Carefully controlled production processes Suitable for most indoor and outdoor environments Uses BONDED METALLIC FINISH products have a multitude of uses over a variety of substrates including steel and aluminium Application areas Office furniture white goods lighting equipment shelving systems architectural applications etc Product Guide Colour A wide range of metallic colours Surface Gloss GL Semigloss HR Semimat CS Mat CM Structure ST Specific gravity 1 3 1 8 gr cm3 Shelf Life 12 months 30 C and 50 RH Codification B Do not resist to humidity and rubbing A clear topcoat is required suggest PE21DT0000509GLX or PE54DT000189GLX for outdoor FF64DT0000189GLX for indoor X Resist to humidity and smooth rubbing A clear topcoat is not required at normal conditions A clear topcoat is required when exposing to harsh environments Q Resist to humidity and rubbing A clear topcoat is not required It has excellent chemical humidity and weather resistance designed specifically for architectural applications Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension corona For the best results with metallic finishes a reduced application voltage on the spray equipment is suggested Attention It is not suitable for application by friction charging equipment tribo Cured Film Thickness Recommended 70 90 µm Theoretical spreading rate at recommended film thickness 80 µm 6 8 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated

    Original URL path: http://inspalvus.lt/products/bonded-metallic-finish/ (2016-04-30)
    Open archived version from archive

  • chrome premium
    coat to avoid any effect damages due to scratching rubbing or fingerprint These thermosetting powder coatings based on epoxy and polyester resins designed for interior applications Features Benefits Metallic finish products Excellent overall performance No solvents or emissions Aesthetic chrome like appearance Suitable for wide range of indoor environments Less waste and pollution to the environment Uses CHROME PREMIUM products have a multitude of uses over a variety of substrates including steel and aluminium Application areas Office furniture lighting and electronic equipment etc Product Guide Colour Chrome like Surface Gloss GL Specific gravity 1 2 1 3 gr cm3 Shelf Life 12 months 30 C and 50 RH Codification B Do not resist to humidity and rubbing A clear topcoat is required like PE54DT000189GLX or FF64DT0000189GLX Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension corona For the best results with metallic finishes a reduced application voltage on the spray equipment is suggested Cure Schedule Metal Temperature C Time minutes 170 15 180 10 recommended 190 8 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 10 12 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated Metals Zinc phosphate or chromate Precautions and Limitations As a result of possible wide application variations and stoving conditions CHROME PREMIUM products may show variation between İBA Kimya Powder Coatings prepared samples and production applied material Therefore it is the applicator and or their customer s responsibility

    Original URL path: http://inspalvus.lt/products/chrome-premium/ (2016-04-30)
    Open archived version from archive