archive-lt.com » LT » I » INSPALVUS.LT

Total: 106

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • ff64
    applications No solvents or emissions Good flow out transparency Clear coat and special effect powders Serviceable finish Suitable for most indoor environments Less waste and pollution to the environment Suitable on top of metallic powders Uses FF64 series has a multitude of uses over a variety of substrates including steel and aluminium Performance Guide UV Weather FF64 is not recommended for exterior use It contains an epoxy component which will chalk on exterior exposure Flow out Very good Buchholz Hardness 90 Conical Mandrel 0 mm Cross Hatch Adhesion Gt 0 Direct Impact 40 kgcm Reverse Impact 20 kgcm Tribo Value 2 0mA Kleber Melting Range 75 105 o C Kofler Gel Time 180 C 120 200 sec Tg DSC 58 0 5 C Product Guide Colour Clear coat and special effect powders Surface Gloss GL Specific gravity 1 2 1 5 gr cm 3 low with clear coat high with special effect powders Shelf Life 12 months 30 C and 50 RH Gloss Level 90 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 170 15 180 10 recommended 190 8 Cured Film Thickness Recommended 40 60 µm for clear coat 60 80 µm for special effect powders Theoretical spreading rate at recommended film thickness 50 µm 13 17 m 2 kg for clear coat Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated Metals Zinc phosphate or

    Original URL path: http://inspalvus.lt/products/ff64/ (2016-04-30)
    Open archived version from archive


  • fluorescent coatings
    powder coatings Home Products fluorescent coatings fluorescent coatings FLUORESCENT Technical data sheet Safety data sheet Back Description Highly reflective FLUORESCENT powder coatings designed for specific areas where a high degree of visibility is essential Fluorescent coating reacts to long wave ultraviolet UV radiation commonly known as black light Through the mechanism of fluorescence UV sensitive pigments present in the coating absorb black light and give off visible light in return All fluorescent RAL shades can be produced for indoor applications and they should be applied at the top of white basecoat Special yellow pink and green fluorescent colours are also available where no white base coat is required for indoor applications Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow

    Original URL path: http://inspalvus.lt/products/fluorescent-coatings/ (2016-04-30)
    Open archived version from archive

  • phosphorescent
    radiators Effect powder coatings Special powder coatings Home Products phosphorescent phosphorescent PHOSPHORESCENT Technical data sheet Safety data sheet Back Description PHOSPHORESCENT powder coatings are commonly called as glow in the dark coatings They contain phosphors and typically glow a pale green to greenish blue colour The mechanism for producing light is similar to that of fluorescent coatings but the emission of visible light persists for some time after it has been exposed to light Phosphorescent coatings have a sustained glow which lasts for some minutes after exposure to light but will eventually fade over time These coatings can be used both in indoor and outdoor applications Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate

    Original URL path: http://inspalvus.lt/products/phosphorescent-coatings/ (2016-04-30)
    Open archived version from archive

  • chameleon
    Polyester powder coatings Polyester powder coatings Effect powder coatings Special powder coatings BY APPLICATION Home appliances Aluminium profile industry Metal furniture Steel doors Industrial Machines Automotive parts Lighting Panel radiators Effect powder coatings Special powder coatings Home Products chameleon chameleon CHAMELEON Technical data sheet Safety data sheet Back Description CHAMELEON POWDER COATINGS change colour with angle achieving two different colour tones on one surface Since they are highly outdoor durable especially aluminium car bike producers prefer these coatings Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated Metals Zinc phosphate or chromate home about us certificates quality control research and development products by type epoxy powder

    Original URL path: http://inspalvus.lt/products/chameleon-powder-coatings/ (2016-04-30)
    Open archived version from archive

  • hammertone
    Products hammertone hammertone HAMMERTONE VEIN AND ANTIQUE Technical data sheet Safety data sheet Back Description HAMMERTONE powder coatings are highly decorative finishes consisting of wrinkle pattern with a slight metallic appearance VEIN AND ANTIQUE FINISH powder coatings are highly decorative finishes consisting of a base colour with a vein pattern of a distinctly different colour The base colour is usually black white or other colours may also be used The vein pattern could be metallic silver gold or copper or a normal colour When veins with B codification are preferred to preserve its decorative appearance application of a protective clear coat is highly recommended These special effect coatings are mostly used in steel door indoor or outdoor furniture fitness and recreation equipment lawn and garden equipment and tea machine applications Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension corona For the best results with metallic finishes a reduced application voltage on the spray equipment is suggested Cured Film Thickness Recommended 70 90 µm Theoretical spreading rate at recommended film thickness 80 µm 6 8 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Codification B Do not resist to humidity and rubbing A clear topcoat is required suggest PE21DT0000509GLX or PE54DT000189GLX for outdoor FF64DT0000189GLX for indoor X Resist to humidity and smooth rubbing A clear topcoat is not required at normal conditions A clear topcoat is required when exposing to harsh environments Q Resist to humidity and rubbing A clear topcoat is not required It has excellent chemical humidity and weather resistance designed specifically for architectural applications Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment

    Original URL path: http://inspalvus.lt/products/hammertone/ (2016-04-30)
    Open archived version from archive

  • fp60
    potable water fittings only blue colour As it is highly reactive Uses FP60 series are applied onto preheated shot blasted steel in order to ensure optimal adhesion and outstanding cathodic disbonding resistance Application areas primer for the 3 layer system in steel pipe protection It is chemical resistance and tough film also makes it suitable for other applications where extended metal protection is required Performance Guide UV Weather FP60 is not recommended for exterior use It contains an epoxy component which will chalk on exterior exposure Flow out Very good Buchholz Hardness 110 Conical Mandrel Cross Hatch Adhesion Gt 0 Direct Impact 170 kgcm Reverse Impact 170 kgcm Tribo Value 2 0mA Kleber Cathodic Disbonding of the system 0 mm 1 5 volt 28 days Water absorption 3 80 C 200 hours Boiling water test no change after 2 hours Abrasion resistance less than 0 10 gr Gel Time 180 o C 54 6 sec Gel Time 200 o C 39 4 sec Gel Time 220 o C 29 3 sec Gel Time 240 o C 25 2 sec Tg DSC 68 0 5 C Tg DSC cured film 106 0 5 C Product Guide Colour Especially green grey red blue Surface Gloss GL Semigloss HR Specific gravity 1 5 1 8 gr cm 3 low with dark colours high with light colours Shelf Life 6 months 15 o C and 50 RH Gloss Level 60 gloss 60 Approvals WRAS Approved Product WRAS approval number 0706529 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule FP60 series are being applied on preheated substrates 235 5 C and cure by residual heat Cured Film Thickness Recommended Recommended 60 80 µm for

    Original URL path: http://inspalvus.lt/products/fp60/ (2016-04-30)
    Open archived version from archive

  • easy cleaning
    It is also called Lotus effect which is referring to the special dirt and water repelling structure of the Lotus flower which have micro structure surface This special micro structure is responsible for easy cleaning effect It is available in all chemistry like epoxy polyester polyester TGIC and TGIC free versions Features Benefits Very hydrophobic surface Water contact angles 130 Excellent overall performance Harder for dirt to stick to the surface Makes cleaning considerably easier Protects the surface Ensures it retains its appearance Extends cleaning intervals Lower maintenance cost Rain drops roll down the surface taking dirt with them Cleaned by the weather Suitable for most indoor and outdoor environments Uses İBA Kimya Easy Cleaning LE dirt repelling powder coating surfaces are interesting for many applications such as architectural use agricultural equipments street furniture dish antenna garden tools etc Product Guide Colour A wide range of colours including metallic colours Surface Structure LE Specific gravity 1 5 1 8 gr cm3 Shelf Life 12 months 30 ºC and 50 RH Gloss Level 4 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension corona and tribo guns Cured Film Thickness Recommended 80 100 µm Theoretical spreading rate at recommended film thickness 90 µm 6 8 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated Metals Zinc phosphate or chromate Precautions and Limitations As a result of possible wide application variations and stoving conditions İBA Kimya Easy Cleaning coatings LE may

    Original URL path: http://inspalvus.lt/products/easy-cleaning/ (2016-04-30)
    Open archived version from archive

  • pu41
    the environment Reduced risk to health Uses PU41 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas all types of hot surface applications such as toasters ovens etc Performance Guide UV Weather PU41 series is not recommended for exterior use Flow out Very good Buchholz Hardness ISO 2815 90 Conical Mandrel ISO 6860 0 mm Cross Hatch Adhesion ISO 2409 Gt 0 Direct Impact ISO 6272 20 kgcm Reverse Impact ISO 6272 20 kgcm Tribo Value it can be produced as tribo version upon request Melting Range 80 100 o C Kofler Gel Time 200 C 50 100 sec T g DSC 68 0 0 5 C T g cured 98 0 1 0 C NSS 1000hrs ISO 9227 Excellent 0 8mm chromated aluminium Chemical Resistance Methyl Ethyl Ketone MEK resistant Ethanol resistant Methyl Isobutyl Ketone MIBK resistant White Spirits resistant Ethyl Acetate resistant 10 Acetic Acid resistant 10 Hydrochloric Acid resistant 10 Ammonium Hydroxide resistant Product Guide Colour A wide range of colour Surface Gloss GL Semigloss HR Specific gravity 1 4 1 8 gr cm 3 Shelf Life 12 months 30 C and 50 RH Gloss Level 70 95 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns If codification includes T Cure Schedule Metal Temperature C Time minutes 200 10 recommended 210 8 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m 2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity and surface profile Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance

    Original URL path: http://inspalvus.lt/products/pu41/ (2016-04-30)
    Open archived version from archive



  •