archive-lt.com » LT » I » INSPALVUS.LT

Total: 106

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • eu30
    No solvents or emissions Resists solvents oils and detergents Excellent resistance to 120 C continuous service conditions Best for stoves Less yellowing at high temperature and by the time Diversity Less waste and pollution to the environment Uses EU30 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas stoves Performance Guide UV Weather EU30 is not recommended for exterior use It contains an epoxy component which will chalk on exterior exposure Flow out Very good Buchholz Hardness 90 Cross Hatch Adhesion Gt 0 Direct Impact 10 kgcm Reverse Impact 10 kgcm Melting Range 80 100 o C Kofler Gel Time 190 C 80 100 sec T g DSC 73 0 1 0 C T g cured 114 0 3 0 C Chemical Resistance Methyl Ethyl Ketone MEK resistant Ethanol resistant 10 Hydrochloric Acid resistant Vegetable oil 135 C 3 hrs resistant Product Guide Colour A wide range of colours Surface Semigloss HR Specific gravity 1 4 1 7 gr cm 3 Shelf Life 12 months 30 C and 50 RH Gloss Level 60 85 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns If codification includes T Cure Schedule Metal Temperature C Time minutes 180 15 190 10 recommended 200 8 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m 2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity and surface profile Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate

    Original URL path: http://inspalvus.lt/products/eu30/ (2016-04-30)
    Open archived version from archive


  • pe38
    all RAL colour One coat finishes No solvents or emissions Heat resistance Very good yellowing resistance Diversity Serviceable finish Less waste and pollution to the environment Excellent resistance to 120 C continuous service conditions Best for stoves Less yellowing at high temperature and by the time Uses PE38 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas dish antenna garden tools stoves window and door systems etc Performance Guide UV Weather PE38 has UV resistance Flow out Good Buchholz Hardness 85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt 0 Direct Impact 25 kgcm Reverse Impact 25 kgcm Tribo Value 2 0mA Kleber Melting Range 95 110 C Kofler Gel Time 200 C 280 320 sec Tg DSC 58 0 0 5 C Product Guide Colour A wide range of colour Surface Gloss GL Semi gloss HR Semimat CS Wrinkle WR Structure ST Specific gravity 1 5 1 8 gr cm³ low with dark colours high with light colours Shelf Life 12 months 30 C and 50 RH Gloss Level 60 95 gloss 60 colour dependent for GL and HR Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 190 15 200 10 recommended 210 8 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m² kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate

    Original URL path: http://inspalvus.lt/products/pe38/ (2016-04-30)
    Open archived version from archive

  • pu48
    and detergents Excellent resistance to 120 C continuous service conditions Best for stoves Less yellowing at high temperature and by the time Suitable for most environments Diversity Less waste and pollution to the environment Reduced risk to health Uses PU48 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas stoves automotive parts etc Performance Guide UV Weather PU48 has UV resistance Flow out Very good Buchholz Hardness 90 Conical Mandrel 0 mm Cross Hatch Adhesion Gt 0 Direct Impact 20 kgcm Reverse Impact 20 kgcm Tribo Value it can be produced as tribo version upon request Melting Range 80 100 o C Kofler Gel Time 200 C 130 170 sec T g DSC 69 0 1 0 C T g cured 96 0 2 0 C Chemical Resistance Methyl Ethyl Ketone MEK resistant Ethanol resistant Ethyl Acetate resistant 10 Acetic Acid resistant 10 Hydrochloric Acid resistant Vegetable oil 135 C 3 hrs resistant Product Guide Colour A wide range of colour Surface Gloss GL Semigloss HR Specific gravity 1 5 1 8 gr cm 3 Shelf Life 12 months 30 C and 50 RH Gloss Level 70 95 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns If codification includes T Cure Schedule Metal Temperature C Time minutes 190 15 200 10 recommended 210 8 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m 2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity and surface profile Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable

    Original URL path: http://inspalvus.lt/products/pu48/ (2016-04-30)
    Open archived version from archive

  • sl54
    500 C Outdoor durable Serviceable finish Less waste and pollution to the environment Pencil hardness is 3H when it is properly cured Uses SL54 series is preferably applied onto slightly shot blasted metals 1 for steel fine steel shot or grit 2 for aluminium zinc other non ferrous metal corundum Application areas barbecue sets and accessories automobile or motorcycle exhaust systems engine covers furnaces heat exchangers and any surface routinely exposed to high heat for an extended time Performance Guide UV Weather SL54 has UV resistance Flow out Good Pencil Hardness 3H Conical Mandrel Cracks over 100 mm Cross Hatch Adhesion Gt 0 Direct Impact 20 kgcm Reverse Impact 10 kgcm Tribo Value 2 0mA Kleber Melting Range 70 90 o C Kofler Gel Time 180 C 140 160 sec T g DSC 57 0 0 5 C Product Guide Colour Black Aluminium Surface Mat CM Specific gravity 1 4 0 5 gr cm 3 Shelf Life 6 months 15 o C and 50 RH Gloss Level 30 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 230 30 recommended Cured Film Thickness Recommended 40 60 µm Theoretical spreading rate at recommended film thickness 50 µm 9 12 m 2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation SL54 series is preferably applied onto slightly shot blasted metals 1 for steel fine steel shot or grit 2 for aluminium zinc other non ferrous metal corundum WARNING Because of the high service temperature reached by SL54 it is not advised to apply any type of chemical

    Original URL path: http://inspalvus.lt/products/sl54/ (2016-04-30)
    Open archived version from archive

  • pu49 soft touch
    Resists solvents and detergents Serviceable finish Less waste and pollution to the environment Reduced risk to health Uses PU49 SOFT TOUCH has a multitude of uses over a variety of substrates including steel and aluminium Application areas lightning helmet electronic equipment laboratory equipment picture frames etc DO NOT TOUCH THE SURFACE WITH HARD MATERIALS Performance Guide UV Weather PU49 SOFT TOUCH has very good UV resistance Flow out Excellent Buchholz Hardness 90 Conical Mandrel 0 mm Cross Hatch Adhesion Gt 0 Direct Impact 20 kgcm Reverse Impact 20 kgcm Tribo Value it can be produced as tribo version upon request Melting Range 85 95 o C Kofler Gel Time 180 C 380 420 sec Gel Time 200 C 140 170 sec T g DSC 66 0 1 0 C T g cured 81 0 1 0 C Product Guide Colour A limited range of colour Surface Soft Touch SF Specific gravity 1 3 1 5 gr cm 3 Shelf Life 12 months 30 C and 50 RH Gloss Level 3 10 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 200 15 recommended 210 10 Apply homogeneously at minimum 90 µm do not forget SOFT TOUCH series coating is semi transparent Cured Film Thickness Recommended 90 140 µm Theoretical spreading rate at recommended film thickness 100 µm 5 7 m 2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity and surface profile Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or

    Original URL path: http://inspalvus.lt/products/pu49/ (2016-04-30)
    Open archived version from archive

  • ee29
    all RAL colour One coat finishes Interior applications No solvents or emissions Excellent chemical resistance Easy to clean white board markers with dry erase Diversity Serviceable finish Suitable for most indoor environments Less waste and pollution to the environment Uses EE29 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas decorative indoor applications whiteboards etc Performance Guide UV Weather EE29 is not recommended for exterior use It contains an epoxy component which will chalk on exterior exposure Flow out excellent Buchholz Hardness 90 Conical Mandrel Cross Hatch Adhesion Gt 0 Direct Impact 40 kgcm Reverse Impact 20 kgcm Tribo Value 2 0mA Kleber Melting Range 66 90 oC Kofler Gel Time 180 C 100 150 sec Tg DSC 62 0 0 5 C Product Guide Colour A wide range of colour Surface Gloss GL Semigloss HR Wrinkle WR Structure ST Specific gravity 1 5 1 8 gr cm3 low with dark colours high with light colours Shelf Life 6 months 30 C and 50 RH Gloss Level 95 gloss 60 for GL Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 170 15 180 10 recommended 190 6 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated Metals Zinc phosphate

    Original URL path: http://inspalvus.lt/products/ee29/ (2016-04-30)
    Open archived version from archive

  • ee34
    One coat finishes No solvents or emissions RAL 6020 Matt or RAL 9005 Matt and all other colours upon request Excellent scratch resistance less chalk consumption greater chalk adherence eliminates residual writing less chalk dust generated Serviceable finish Less waste and pollution to the environmental Uses EE34 series has a multitude of uses over a variety of substrates including steel and aluminium Application areas Developed especially for blackboards Performance Guide UV Weather EE34 is not recommended for exterior use It contains an epoxy component which will chalk on exterior exposure Flow out Very good Buchholz Hardness 90 Conical Mandrel 20 mm Cross Hatch Adhesion Gt 0 Direct Impact 10 kgcm Reverse Impact 5 kgcm Tribo Value 2 0mA Kleber Melting Range 80 104 C Kofler Gel Time 180 C 500 550 sec Tg DSC 54 0 0 5 C Product Guide Colour RAL 6020 Matt or RAL 9005 Matt and all other colours upon request Surface Matt CM Specific gravity 1 2 1 8 gr cm3 low with dark colours high with light colours Shelf Life 6 months 30 C and 50 RH Gloss Level 2 15 gloss 60 Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cure Schedule Metal Temperature C Time minutes 190 15 200 10 recommended 210 6 Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc

    Original URL path: http://inspalvus.lt/products/ee34/ (2016-04-30)
    Open archived version from archive

  • degassing
    furniture Steel doors Industrial Machines Automotive parts Lighting Panel radiators Effect powder coatings Special powder coatings Home Products degassing degassing DEGASSING Technical data sheet Safety data sheet Back Description The phenomenon of pinholing in powders coatings applied over hot dip galvanized surfaces has been identified as the most serious problem associated with coating integrity Iba Kimya develops systems with DEGASSING properties G that minimizes or eliminates pinholing Additives included in the degassing grades of coating delay the onset of fusion of the powder which gives more time for entrained gas to escape from the molten polymer film Application Data Application Method Can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60 80 kilovolts corona and tribo guns Cured Film Thickness Recommended 60 80 µm Theoretical spreading rate at recommended film thickness 70 µm 8 10 m2 kg Practical spreading rates will vary due to such factors as method and conditions of application specific gravity surface profile and texture Application Guide Surface Preparation All surfaces should be degreased and pre treated for optimal performance Suitable pre treatment includes Aluminium Yellow chromate or green chromate phosphate Ferrous metals Zinc phosphate or Iron phosphate Zinc Coated

    Original URL path: http://inspalvus.lt/products/degassing/ (2016-04-30)
    Open archived version from archive